ARM-ESR212
Feature:
- Supports SSI EEB 3.5, CEB 1.1 or AMD Dual Opteron compliant server boards
- Power MOSFET and pre-charge circuit for surge current protection on hard drive and backplane
- Horizontal backplane design(3-in-1 SATAII/SAS/Multi-lane)to allow maximum airflow for system cooling (3-to-1 backplanes, 4-to-1 30pins port)
- Included SGS approved slide rail
- 3 years warranty on power supply
- Other High Quality Components are backed by life time warranty
| Dimension: (D x W x H) |
3.5 " x 19 " x 28 " | ||
| Front Access Connector : |
|
||
| Front Access switch | ower On/Off, Reset, Alarm Reset |
||
| Front Panel Indicators | Power On, HDD Activity, PSU failure, Fan failure, Over heat warning, LANs |
||
| Hot swap drive indicators | Power On, HDD Activity, HDD failure |
||
| Power Supply | 550W 1+1 Hot-swap redundant power supply |
||
| Power Supply Options | 460W Fixed, 600W Fixed |
||
| Drive Bay |
|
||
| Data Backplane | a) 3-in-1 SATAII/SAS/Multi-lane, switch data cables only |
||
| System Board | Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant |
||
| Included Data cable | Yes | ||
| Included slide rail | Yes | ||
| System Monitoring | Fan / over heat / power supply fault detection |
||
| Thermal | Intel Validated Pass Xeon 3.6Ghz 800Mhz |
© Copyright 2005 Ameri-rack Technology, Inc. All rights reserved.