APA-TFC1

flexible Adapter, SD to Micro-SD slot. Convert SD memory card to fit into Micro SD / TransFlash socket. Supports SD memory and SDIO cards.

Adapter, slim CD/DVD to IDE w/jumper. ATAPI 50pins to standard 40pins IDE, Power and CD Audio connectors with jumper for setting Master, Slave and Cable Select mode.

APA-JMRER1

Adapter, slim CD-RW/DVD to IDE, ATAPI 50pins to IDE 40pins.

APA-CD1

Adapter, slim CD-RW/DVD to IDE w/jumper, ATAPI 50pin to IDE 40pin connector w/jumper setting mode. effective immdtly this P/N changes to APA-CD1-JP.

APA-CD2-JP

Adapter, slim CD/DVD to 2.0mm pitch 44pin IDE/ Power and CD Audio connectors w/jumper setting mode.

APA-FD1-C30

FDD Adapter. Female header on adapter to direct plug to motherboard FDD port and connect to slim FDD thru FFC cable.

APA-JM201

Combo Adapter for slim FDD and slim CD/DVD in one card( two adapters in a card).

APA-MSD1

Adapter, SD (Security Digital) to Mini-SD (Not the regular "Mini-SD to SD" Adapter).

CBL-2C15RA14 (2*15pin R/A)	Drawing

SATA power cable adapter, 2 low-profile 15pin right- angle connectors to 1*Molex 4pin, wire length 17cm.

CBL-EPCI06VR-9
CBL-EPCI06VL-9
CBL-EPCI08VR-9

NEW custom made low-profile cable adapter, 6pin right-angled or left-angled or 8pin right-angled low-profile male connector to female in 9" cable, use for full-height double -space PCIE graphic cards GTX-660,670,680, 760,770,780 ETC, in 1U/2U/3U rackmount chassis.

APA-HD25

Adapter for 2.5"IDE HDD (44pins) to use standard 40pins IDE cable. This adapter allows you to connect a 2.5" PATA hard drive to a standard IDE cable.
Features:

• 2.5" drive connector (44pins female)
• IDE connector (40pins male)
• Molex 4pin power connector

APA-HD44C30

cable adapter,40 to 44 pin hard drive cable for 2.5" hard drive (40 pin female to 44 pin female). direct connect 2.5" IDE hard drive to motherboard IDE port.

Adapter, 2x CF to 2.5" IDE HDD. Enable up to two CompactFlash cards to use TRUE IDE mode. Directly replace 2.5" IDE hard drive to CF.

APA-HD18ST

Adapter, 1.8" ATA-6 Min-drive(non-ZIF) to 40pins IDE 3.5" drive form factor.

APA-CF5-V

CF to IDE Adapter
1slot/1CF vertical connect, 47 x70 x15(mm)
Enable Compact Flash(CF) cards and Microdrive to use IDE mode.

APA-CF5-H2

CF to IDE Adapter
2slots/2CFs horizontal connect, 50 x 70 x15(mm)
Enable Compact Flash(CF) cards and MicroDrive to use IDE mode.

APA-2DH25

Hard Drive Adapter, for 2x2.5" SATA HDDs in a 3.5 inch drive bay. Use the same screws, SATA data and SATA power cables.

APA-HD25B2

Hard Drive Adapter, for 2x 2.5" IDE HDDs in a 3.5" Hard Drive Mounting Plate.
House up to 2 laptop drives into one 3.5" HDD plate.
. incDDs On

APA-MP1

Adapter for MiniPCI(Type3) to PCI/PCI-X slot.
Enable your PC/IPC to use Type3 MiniPCI cards like Wireless Lan.
for 5V or 3.3V PCI/PCI-X slots.
With L-bracket for any I/O retension

APA-MP2

Adapter card for Mini-PCI(Type 3) to PCI slots.
This adapter converts a standard PCI slot to a Mini-PCI (type III) slot.

FAN-4056S5
FAN-4028J3

1)FAN-4056S5 (mfr#9CR0412S501), 4056 COUNTER ROTATING FAN 40mm x 56mm (thickness), 15,800rpm/24.8CFM/57.5dBA, w/ 1*3pins 12" length wire.
2)FAN-4028J3 (mfr#109P0412J3023), 4028, 40mm x28mm (thickness),12500rpm/16.8CFM/44dBA

BR-SN135SS

Ruggedized Aluminum Mobil Rack, SAS/SATA2 up to 300mb/s transfer rate, additional cooling fan, all metal frame and aluminum tray, very solid in structure, good for use in harsh environment.

BR-SN135S

Ruggedized Aluminum Mobil Rack 3.5" HDD, Ultra 320 SCSI, 2 cooling fans front & rear, 4 LED for P/S, Temp, HDD & Fan sensor. All aluminum frame and tray, very solid in structure, good for use in harsh environment.

BR-SN136T

Ruggedized Aluminum Mobil Rack, SATA II up to 300mb/s transfer rate, additional cooling 60mm blower underneath, all metal frame and tray, very solid in structure, good for use in harsh environment.

BR-SN2131SS

HDD Cage, hot-swappable, SAS/SATAII 2*5.25" bays to 3*3.5" Hdds.

BR-SN3141SS

HDD Cage, hot-swappable, SAS/SATAII 3*5.25" bays to 4*3.5" Hdds.